Walk and Fly are available only in perspective views.

Walk and Fly are available only in perspective views.

All of a sudden, this dialog box started popping up again while performing a 3DOrbit inside AutoCAD Architecture.

Walk-n-Fly
Walk-n-Fly

After checking this thread for a solution and finding none, I offered the following:

Add the following to your section in your FixedProfile.aws

 <HideableDialog id=”VMToolsUI.WalkFlyToPerspectiveView” title=”Walk and Fly – Change to Perspective View” category=”Navigation” application=”” result=”1001″><Preview><TaskDialog Source=”/AcTaskDialogs;component/TaskDialogs.xaml” Id=”VMToolsUI.WalkFlyToPerspectiveView” xmlns=”clr-namespace:Autodesk.Windows;assembly=AdWindows”></TaskDialog></Preview></HideableDialog>

Make sure you do this while AutoCAD is not running, or the fixedprofile.aws file will get overwritten when you do close AutoCAD.

So Proud of my Son

So Proud of my Son

Thought I’d share with you a little success my son has had with TSA at his highschool.  Earlier this school year, he entered the Architectural Design competition at the TSA technology day at the state fair in Georgia.   The challenge was to design a garage with workshop.  He put together a design plan for a wood working shop inside an enlarged 3 car garage. Here was the design challenge copied from the flyer:

Design Challenge Background:

DIY (Do-it-yourself) is coming back into style. Many home owners are adding separate multi-use buildings to park vehicles and have a workshop as well.

OBJECTIVE:
The challenge is to design one of these garage/workshops for a client. Your job is to act as an architect and prepare a pro-posed design for a client who wants to park two cars and have a workshop in the same building, separate from the main house. You do not have to include a main house. The entry needs to be only the garage/workshop. Consideration needs to be made for getting materials into and large projects out of the workshop. Research what machines would be included in the workshop and where they may be placed inside for safe use. Also include some space for storage.

Here is what he submitted:

This design was started as a 2D sketch in Sketchup3D, recreated in Revit 2015, then exported to Lumion3D for rendering and presentation.  Here is a photo of his presentation board.

Submittal Board
Submittal Board

The following images are the rendered images used in his presentation as exported from Lumion.  Note, Lumion3D saves in bmp format.  These images were converted for presentation on the web.

Floor Plan
Floor Plan

Tsa Woodwork – Sheet – A101 – Workshop Floor Plan

 

Rendering Birdseye View
Rendering Birdseye View

 

Rendering Perspective
Rendering Perspective

 

Rendering Interior
Rendering Interior

When he presented his design and was interviewed he ended up winning the blue ribbon – First Place for his efforts. A good effort for a 10th grader with no formal training or any classes in Architectural Design.

The blue ribbon!
The blue ribbon!

View his Lumion3D rendering and panorama model for the TSA Technology Day Architectural Design Competition.